Another Turntable

With the finished turntable mounted in its pit, filler material still needs to be added in the area between the benchwork and the turntable casting. The prototype turntable was built of cast iron with its distinctive lightening holes.

Like most modelers, I have more locomotives than I really need. My choice, then, is to remove some of them from the railroad so I can operate it without stumbling over the extra motive power OR build some place to put them. My choice is to build a roundhouse in which to store all the engines I don't need but want to have anyway.

     At Oakdale, there is a space which is out of the way but is the perfect size for a small engine terminal. This area has been earmarked for such a terminal since I started building the railroad. It will allow me to have my "overflow" area and, also, to build a Model Masterpieces Colorado Midland roundhouse kit I have had for around 20 years. The first step in all of this was to locate the turntable and go from there.

     My Sellers turntable was built from a Freshwater Models kit which was out in limited edition several years ago. I had provided prototype information to the kit company and they did such a nice job on it, I had to have one. Made with a plaster pit and cast metal base, it went together rather quickly. Installing in the hole I had made was a bit more problematic. It required two people, one on top of the railroad and another beneath the benchwork to put nuts on the support bolts. My darling wife agreed to help and, as a true gentleman would, I offered her the choice of positions. Climbing underneath a built railroad and trying to start nuts with my left hand (I'm right-handed) is a bit of a challenge but, eventually, we secured the turntable and leveled it up. 

   

Lines for tracks in the roundhouse extend from the pit. The turntable is based on a 60-foot prototype which is ample for the locomotives used on the S&C.

The next job will be to assemble the eight-stall roundhouse and try to get it reasonably aligned with where I want the tracks to go. A real engine servicing area requires a coaling station, sand station, water plug and ash track as a minimum so I have to allow room for those and then assemble the appropriate structures. With the company service tracks and a new industry track I discovered, there will be four more car spots in Oakdale which should add more interest.